Universal Heated Grips Inserts Handlebar Hand Warmers Fits Grip ATV Motorcycle Electric | Автомобили и мотоциклы

Universal Heated Grips Inserts Handlebar Hand Warmers Fits Grip ATV Motorcycle Electric Hand Grip

 

[product name]: 12V ship type adjustable high and low temperature electric handle

  [product model]: CS-043A1 [product gross weight]: 77g [product material]: PET metal heating film [product size]: length: 9.5CM; width: 8cm [Input voltage]: 12V [product power]: 10W (power on one side) is 20W on both sides [handle temperature]: low temperature: 30 ° C; high temperature 50 ° C -60 ° C [Switch Type]: Three-speed adjustable switch [product accessories]: a pair of left and right handles, a pair of heat shrinkable sleeves; one waterproof insulating tape; one manual [Applicable models]: 12V all motorcycle models    [Product Advantage]: [1] adopts simple modification method, which is non-destructive appearance, easy to operate, and easy to install.   [2] PET metal heating film, the heating speed is very fast, a few seconds of heat, safe and fast [3] The three-speed adjustable switch can adjust the high and low temperature according to your own needs, and the design is very user-friendly. [4] Switch design, can be directly mounted to the mirror lens holder, no need to punch, no damage, very simple [5] DC 12V input, suitable for all motorcycles, very wide range of use   [Installation method]: [1]: Put the heater on the handlebar and adjust it to the appropriate position. [2]: Fix the electric heating piece evenly on the handlebar with a piece of tape, especially at the wiring of the electric heating piece. [3]: Put on the casing, adjust the position, use the hot air gun (can also use a lighter or a hair dryer) to blow the two creases of the outer casing in a longitudinally symmetrical manner until the contraction is uniform, and then evenly blow other parts until the coat Each part of the tube shrinks evenly and evenly [four]: The switch is installed under the mirror of the rearview mirror [Five]: Connect the power cord. The red and black wires are not divided into positive and negative poles, but must be connected to the electric door lock (where the key is inserted).