*История изменения цены! Указанная стоимость возможно, уже изменилось. Проверить текущую цену - >
Месяц
Минимальная цена
Макс. стоимость
Цена
Aug-17-2025
245.67 руб.
250.73 руб.
247.5 руб.
Jul-17-2025
199.83 руб.
203.62 руб.
201 руб.
Jun-17-2025
241.57 руб.
246.90 руб.
243.5 руб.
May-17-2025
239.87 руб.
244.70 руб.
241.5 руб.
Apr-17-2025
191.33 руб.
195.44 руб.
193 руб.
Mar-17-2025
235.91 руб.
240.7 руб.
237.5 руб.
Feb-17-2025
234.47 руб.
239.10 руб.
236.5 руб.
Jan-17-2025
232.55 руб.
237.27 руб.
234.5 руб.
Новые товары
Горячие 2 пары 9450 винтов CW CCW лопастей перезаряжаемые LED световые молнии для DJI Phantom 3 стандартного продвинутого профессионального SE.
Спереди Колеса Подшипника Сиденья Удерживающий Пин для 1/5 Rovan F5 MCD XS-5 RR5 Грузовик Rc Автозапчасти.
774.9
Корпус для автомобиля с ЧПУ из сплава колонка 1/10 RC Crawler Car Defender Traxxas TRX4 - купить по
Набор мини-соединителей Pigtail Losi Style 5/10 JST-DS LOSI 2.0MM 2-контактный разъем штекер-гнездо мужской-женский с проводом 26awg 100 мм для подключения RC-батареи.
478.06
Betaflight F4 Pro V3 Плата контроллера полета с встроенным барометром, OSD и слотом для TF-карты для FPV квадрокоптера.
Задний спойлер для радиоуправляемого кузова хвостовое крыло задний масштаба 1/12
101.68
Модуль передатчика FrSky IRX4 LITE 2.4G 4 в 1 мультипротокольный настройщик с антенной для X-Lite Walkera FlySky FS DSM2 SFHSS TBS.
4131.98
Русский перевод: 1 шт. труба/трубка из углеродного волокна 10 мм внешнего диаметра и 6 мм внутреннего диаметра, длиной 500 мм, 3k, 100% состоящая из углеродного волокна (обернутая рулоном) для квадрокоптера/гексакоптера модели.
1348.9
20 шт. M2*19 мм Круглые алюминиевые колонны-стойки для крепления стойки стоек квадрокоптера FPV RC на раме.
Характеристики
Multi Servo Tester 3CH ECS Consistency Speed Controler Power Channel CCPM Meter Master Checker RC Dron Helicopter Parts Hobby | Игрушки и
Описание товара
Servo Tester Model airplane ESC Motor Servo Multi-function Tester Simple Servo TesterDemonstration of servo connectionDemonstration of ESC and motor connectionInstructions:Refer to the following pictures: the left side is connected to the servo, divided into three groups of upper, middle and lower, which can be connected to three servo; the right side is connected by a single pin, near the side is negative pole (see identifier number), connected to the battery negative pole, pay attention not to be reversed, if the power supply connection is reversed, the IC will be burned; neglect the pins corresponding to S identifier. Turn on the power supply, the blue light will be on at the same time, and then only the first on the left is on, it is the manual potentiometer test, press the button, the middle light is on, it is returning to the middle test; the third light is on, automatic test. The connection method of testing ESC is the same as that of the servo, but the input end should not be connected to the power supply. The test motor should be connected to the ESC first when testing motor, then it is just like testing ESC.By turning the knob, you can test the servo, no need for remote controller and receiver anymore.If connected to ESC (brush motor or brushless), it can get rid of the remote control equipment and adjust the speed manually. It can be used to test the ESC or motor performance.It is just what you need, cheap and practical little thing.No more tedious connections to remote controllers and receiversIt is equivalent to the function of a "manual receiver"Simulate remote control output by manual knobProduct characteristics:1. Testing the servo or ESC in three modes- Manual mode: Reaction time can be measured by rotating potentiometers at different speeds.
-Look for neutral mode: let the servo return to neutral point. -Automatic two-brush mode: make the servo swing at the maximum angle.
2. It can connect 1-3 servos at the same time and test the synchronization and consistency of 1-3 servos.3. Can connect 1-3 ESCs at the same time, test and compare their reaction time.4. Three servos of CCPM helicopter can be connected at the same time to debug the helicopter and servos by using neutral position and synchronization function.5. It can connect the servo of fixed-wing aircraft and use neutral function to install and adjust the rudder.Product Specification:(1) Output: <15mA(5.0) Three actuator sockets(2) Input: DC 4.5-6.0v(3) Output signal: 1.5ms + 0.5ms(4) Size: 35 x 32x 14mm(5) Weight: 8g(6) Adjustment mode: manual, automatic, median.Easy to detect the virtual, jitter and set the median position of the servoIN is input/OUT is outputProduct dimension and weight
Товар пришел быстро,что очень меня порадовало. Перчатки очень хорошие, качество отличное ,теплые,мягкие,удоб ные. Полностью соответствуют ,как на картинке,даже круче. О... Читать отзыв полностью...
Купила дочкам две такие коробочки, хранят там свои сокровища))) бусинки, бижутерию, поделки. Им очень нравится, и мне тоже, нигде ничего... Читать отзыв полностью...
Забавная маска, довольно страшная. Цена не высока, по размерам угадали. Главное в маске, эффект неожиданности. Шутка удалась. Для маскарада и... Читать отзыв полностью...
Фонарик очень практичный . Очень важно, что есть крючок, удобная выдвижная подставка с магнитом. Также , можно менять... Читать отзыв полностью...