for kenwood walki talkie necklace earphone listening aids function voice transmition sender induction transmitter | Электроника

"Any dispute / Direct negative feedback"  before contact means "Buyer bad " !! And not welcome such buyer !! Please go away !! ( Because business is cooperation ,not fight each other ) .

If protection time is running over ,please contact to extend time ,
if any problem found ,please contact to solve by a friendly way .

Attention !!!

1.    if you are not fimiliar with such product ,please do not buy !!!

2.  Such product used in quiet place only ,not suitable in noisy condition such as street .

3.  Voice by included magnets is lower volume , if you need loud voice ,please choose  correct property " with  A680 or with 218 "  .

Special connector for kenwood walkie talkie and relative series with same connector : 

Where to put small magnet :

Note : 

1. USD 10.99 sales does not have wireles earphone included ( it has magnets ) ,you need to buy it yourself . The distance for this loop to earphone can not be too far .if you are not fimiliar with such product ,we dont recommend to you to buy !!!

2.  USD10.99 sales is an earphone cable with voice transmitter function only ,it does not work independently , you need to have you own walkie talkie to work together . 

or you can choose extra property :
with A680 , skin color body and skin cover;
with 218 ,  skin color body and black cover 

Content :
magnetic x 1 set (  2 small + 1 big ）
 earphone cable  x 1 ;

Pack by plastic bag  .

 

1) How do you wear the earpiece?

-Clean and dry out your ears thoroughly before use

-Wear the loop set, connect (2) 9V batteries, the red connectors and plug the jack into your mobile phone

-Turn the volume on the lowest setting

-Turn your head to the left or right so your ears are horizontal to the ground and ceiling. Place the earpiece in your ear. You will hear a noise when it touches your ear drum.

NOTE: It must touch your ear drum to function. If not, the sound will either be too quiet or you won’t hear it at all

-Slowly turn up the volume until it’s working
 

2) How do you take out the earpiece?

-Place the magnet near your ear canal and slowly turn your head so your ear is parallel to the ground. Gravity and the force of the magnet will pull the earpiece to the magnet. It may help to use a metal stick on the end of the magnet for extra control.
 

3) Does the earpiece itself require any power?

-No, the earpiece itself does not require power. The power comes from the loop set by the 2 9V batteries. Remove batteries when earpiece is not in use to avoid battery drain
 

4) The volume is too low or I can’t hear anything. Why?

-This usually means it was not positioned correctly. It must be touching the ear drum to function correctly. Remove the earpiece and position it again
 

5) How is the sound quality when it’s in my ear?

-The sound is crystal clear because the system does not product any background noise. If you hear any abnormal noises, check your mobile phone and jack connection
 

6) Can I listen to music with the invisible earpiece?

-Music requires a high fidelity earphone. It’s not suggested to use the earpiece for listening to music