Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн.

Сохраните в закладки:

Цена:8550.36RUB*

Количество:

Доставка в Эль-Монте, по России и СНГ


  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн. - Фото №1
  • История цены

    *История изменения цены! Указанная стоимость возможно, уже изменилось. Проверить текущую цену - >

    Месяц Минимальная цена Макс. стоимость Цена
    Sep-15-2025 10175.95 руб. 10684.65 руб. 10429.5 руб.
    Aug-15-2025 10089.42 руб. 10593.37 руб. 10341 руб.
    Jul-15-2025 8465.5 руб. 8888.17 руб. 8676.5 руб.
    Jun-15-2025 9918.62 руб. 10414.73 руб. 10166 руб.
    May-15-2025 8636.64 руб. 9068.56 руб. 8852 руб.
    Apr-15-2025 9747.68 руб. 10234.78 руб. 9990.5 руб.
    Mar-15-2025 9662.98 руб. 10145.58 руб. 9903.5 руб.
    Feb-15-2025 9576.0 руб. 10055.78 руб. 9815.5 руб.
    Jan-15-2025 9491.87 руб. 9966.71 руб. 9728.5 руб.

    Новые товары

    Характеристики

    Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн.

    Описание товара


    ASG102  Automotive Signal Generator



    JHASG102 Manual (I) Interface introduction (2) Button description and main functions: F1: It is mainly used to switch between the first and fourth items. Or to switch the value of the selected item.F2: It is mainly used to switch between the 2nd and 5th items, or to switch the value of the selected item.F3: It is mainly used to switch between the 3rd and 6th items, or to switch the value of the selected item.OK: Determine the button for confirmation or save. : Up button for up selection or value increase. : Down button for down selection or value reduction.: Left button for moving one item (bit) to the left. : Right button to move one item (bit) to the right.CH : It is mainly used for switching between channel 1 and channel 2 configuration interfaces.MENU: Mainly used to return to the menu selection interface.0-9: The number key changes the corresponding digit value to a numeric key value. : On/off.(2) Port description:(Figure 1-1) CH1: Channel 1 signal output.CH2: Channel 2 signal output.CAN: CAN data receiving end. Figure 1-1 (3) Instrument features:According to the automotive rules and actual needs of on-site diagnosis, the instrument summarizes and analyzes the characteristics of existing car signal generators:1. The signal characteristics can be adjusted in real time: the signal can be adjusted at any time by adjust waveform, amplitude, frequency, missing teeth and other indicators. This feature greatly helps todetermination of the fault in the vehicle maintenance process.2. Two-channel waveform signal output can simultaneously output signalsof different frequencies, amplitudes and waveforms within two bandwidths.3. CAN bus function:It is mainly used to test whether the CAN bus of various models is in normal communication. The test rate is 10K, 20K, 33.3K, 50K, 62.5K, 83.3K, 125K, 250K, 500K, 1M.4. Friendly HMI: the instrument adopts the most simple design idea, 320*240 large-screen liquid crystal display, the display interface logic is clear; the panel operation is clear, which is convenient for the operator to quickly carry out various operations.5. the appearance is small and convenient, using over injection molding, good use of feel. The internal components are all imported, users can use it with confidence!(II) Main interface operation  1. After the instrument is turned on, enter the main operation interface (Figure 1-2). Press any button (except on/off key), the first item (channel 1) will be selected by default.2. Then use the “ ” button to switch the selected item.3. After selecting the item, press the OK button to enter the corresponding configuration interface. Figure 1-2 (III) Signal generator operation After booting into the main interface, press the button to select “Channel 1” or “Channel 2”, then press “OK” to enter the signal generator parameter setting interface. The signal generator operation interface is shown in        Figure 1-3 Figure 1-4 Mainly configure output signal parameters such as frequency, amplitude, duty cycle, waveform, X, Y.1.Waveform selectionPress F1 to select the first item (“Waveform”), then use the “ ”or“ ” key or the direct numeric key to input the value (range 1-5, a total of 5 waveforms) to select the waveform to be output. The serial number can be seen on the display. Corresponding waveform. The waveform and corresponding serial number are as shown below: 2. Setting frequencyPress the F2 key to select the “Frequency” item, use the “ ”or “ ”key to select a value of the frequency, and then add or subtract the value by “ ” or “ ” step or change the value by directly using the number keys.Note: The frequency value ranges from 1HZ to 8000HZ.3. Set the amplitudePress the F3 key to select the “Amplitude” item, use the “ ” or “ ” key to select a certain value of the amplitude, and then use the “ ” or “ ” key to increase or decrease the value step by step of the bit or directly change the value by the number key.Note: The amplitude value ranges from 0V to 20V.4.Set the duty cyclePress the F3 key to select the “Amplitude” item, use the “ ” or “ ” key to select a certain value of the amplitude, and then use the “ ” or “ ” key to increase or decrease the value step by step of the bit or directly change the value by the number key.5. Set the X valueX represents the number of sine waves or square waves.Press the F2 key to toggle the “X” item, use the “ ”or “ ”key to select a value of X, and then press the “ ” or “ ” key to step up or subtract the value or change the value directly by the number key.Note: The X value range is 1-199.6. Set the Y valueY represents the number of straight lines.Press the F3 key to toggle the “Y” item, use the “ ” or “ ”key to step up or subtract the bit value or change the bit value directly by the number keys.Note: Y value range is 0-9.For example:  Example: Now set the signal generator channel 1 to output an“amplitude 3.3V, frequency 500Hz, duty cycle 10%, square wave”; set channel 2 to output a “5.0V, frequency 1KHz, X=58, Y=2 sine wave". The specific operations are as follows: After the signal generator is turned on, select “Channel 1”, press “OK” to enter the channel 1 setting interface, set waveform 1 (square wave), amplitude 3.3V, frequency 500Hz, duty cycle adjustment to 10%, as shown:Connect the signal generator channel 1 connector and oscilloscope with an oscilloscope probe. The signal output can be observed through the oscilloscope as shown in Figure 1-6.Press “CH” to switch to channel 2 setting interface (or select “channel 2” after power on), set waveform 4 (X+Y sine wave), amplitude 5.0V, frequency 1000Hz, X to 58, Y to 2 , as shown in :Connect the signal generator channel 2 connector and oscilloscope with an oscilloscope probe. The signal output can be observed through the oscilloscope as shown in Figure 1-8.(IV) Setup operation After booting into the main interface (or if you press the “MENU” button directly on other interfaces, then back to the main interface), press “Set” and then press “OK” to enter the setting interface, as shown in Figure 1-9:The setup operation can set up the language, sound, brightness, or factory reset.1.language settingPress the “F1” key directly to switch the Chinese/English interface.2.Sound settingsPress the “F2” key directly to turn the sound on or off.3.Brightness settingPress the “F3” key directly to adjust the brightness of the screen. The brightness value is 1-5. The larger the value is, the brighter the screen will be.(V) Restore Factory Press “ ” or “ ” to select “Restore factory” Press “OK” again to confirm the factory reset. After the factory was restored, the system parameters will be changed to the factory default parameters and go to the main interface.Note: After restore factory, all the setting parameters will be restored to the factory default parameters.(VI) CAN receiving operation After booting into the main interface (or if you press the “MENU” button directly on other interfaces, then will back to the main interface), press “Can bus” and press “OK” to enter the CAN data receiving interface, as shown in Figure 1-10:1. Data reception:The data receiving area is for displaying each frame data received, wherein the green marked frame data is the most recently received data. The system can temporarily store 50 frames of data (loss of power loss). To view the previous data of each frame, please stop data reception (press “F3” to stop), and then use “ ” or “ ” key to view. The data selected for each frame is marked in green.2. Data analysis instructions:StdId: Standard frame identifier.ExtId: Extended frame identifier.IDE: Identifies a standard frame or an extended frame. The main difference is that the ID is different, the standard frame ID is 11-bit range(0-0x7ff); the extended frame ID is 29 (0-0x1fffffff).RTR: The data frame is also a remote frame.FMI: A 16-bit value indicating which filter the filter is filtered by.data:data.In the upper right corner of the data parsing area, “no data” will always flash when no data is receiving. Once the data is received, green “have data” will be displayed, as shown in Figure 1-10.3. Receiving operation(1)Connect Data line: First, insert the data receiving line into the CAN receiver of the signal generator first, and put the “breaking needle” on the other end. When measuring, connect the H and L lines of the connector to H and L of the CAN communication interface of the car. (2)Instrument operation: When preparing to receive data, firstly make sure that the receiving status is “on”, if not press “F3” to turn it on. Then select the communication baud rate, there are two ways: one is manual adjustment, that is, manually press the “F1” key to select the baud rate. When manually switching to a baud rate, if there is data coming, the receiving area will immediately display the result. At this time stop switching the baud rate, the baud rate will be the date what we want; the other is automatic matching, that is, after pressing the "F2" button, the system will automatically scans the baud rate, and simultaneously in the data receiving area, the word "Scanning..." will be displayed to indicate that it is being scanned. If data is received, the received data will be displayed immediately on the screen and the baud rate will be set to the value of current communication. If no baud rates have been received after scanning, the screen will display: “Scan failed”, indicating that the scan failed.Note 1: The communication rate can be selected as 10K, 20K, 33.3K, 50K, 62.5K, 83.3K, 125K, 250K, 500K, 1M.Note 2: If the baud rate is manually set and no data is received at each baud rate, please check if the connection is loose or lost, if it matches automatically.4. Send dataIn the CAN receiving setting interface, press and hold the “OK” button, then press the “ ” button. At this time, “Sending data...” will be displayed on the display, indicating that the data is being cyclically transmitted.Note: The data sent is freely defined by itself. It is only used for testing.The transmitted data is {0x11, 0x22, 0x33, 0x44, 0xaa, 0xa5, 0x5a, 0xbb}. It will send one data first and then send 2 data. Data... is sent cyclically in sequence. No other buttons are active during data transmission. To exit the transmission, press the “MENU” button.(VII) Upgrade operation Press and hold the "OK" button in the off state, and then press the power button, it will enter the U disk mode. After connect to the computer by the USB cable, the U disk will appear, then copy the upgrade file update.bin into the U disk, then press the " " button to upgrade, restart after the upgrade is complete.Special note: The 18650 lithium battery used in the power supply of this instrument does not have a protection board!    





    Трекер стоимости


    Отзывы покупателей

    Новые отзывы о товарах

    Владимир 19 Мая 2023, 11:16 #

    Абсолютно не ясно, как подключить. Может кто прояснить ?... Читать отзыв полностью...

    irinamalaxenko 23 Декабря 2021, 11:11 #

    Товар пришел быстро,что очень меня порадовало. Перчатки очень хорошие, качество отличное ,теплые,мягкие,удоб ные. Полностью соответствуют ,как на картинке,даже круче. О... Читать отзыв полностью...

    Екатерина 19 Декабря 2021, 08:10 #

    Красивые, яркие, интересные и очень оригинальные серьги. Мне они понравились буквально с первого взгляда. Нисколько не пожалела, что их заказала.... Читать отзыв полностью...

    Diana 19 Декабря 2021, 02:03 #

    Заказала этот крутой костюм эльфа для косплея и новогодней вечеринки ? С нетерпением ждала эту посылочку и вот наконец-то получила... Читать отзыв полностью...

    Nik 19 Декабря 2021, 13:49 #

    Ключ пришёл быстро. Заказал для своего авто. Цена не высокая, для такого девайса. Долго искал в... Читать отзыв полностью...

    Tatyana 19 Декабря 2021, 02:32 #

    Очень нужная вещь в каждом доме. заказала себе 3 штуки, так как у нас очень много лекарств дома и они... Читать отзыв полностью...

    Рома Белов 19 Декабря 2021, 12:01 #

    По качеству рубашечка порадовала, хороший пошив, ни одной ниточки не торчит. Если говорить в целом понравился стиль, фасон. Только примерив... Читать отзыв полностью...


    Отзывы о Автомобильный генератор сигналов напряжения и частоты ASG102 с 2 каналами выхода формы волн.

    Данную страницу никто не комментировал. Вы можете стать первым.
    Введите символы или вычислите пример:
    captcha