LCD Controller Board DIY Kit VGA (RTD2270L)Driver LVDS Inverter - Turn to Monitor for 1280X800 B154EW02 | Электроника

LCD Controller Board DIY Kit VGA (RTD2270L)Driver LVDS Inverter - Turn to Monitor for 1280X800 B154EW02 | Электроника

LCD Controller Board Kit (RTD2270L) with Driver Inverter LVDS -- Turning your LCD into Monitor

   This is a great set of easy-reassembling LCD controller kit which is used to turn a bare laptop LCD panel into a desktop/PC monitor. It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Plug&play kit, no need soldering.

  
   The lcd controller board's size is small and compact -- 30mmX110mm .

   Necessary Accessories for turning a LCD to desktop monitor: LCD Controller board, Inverter, LVDS cable, Keypad, VGA cable, Power Adapter. If you have already had a VGA cable and a power adapter (12V,4A), this kit is a great choice for you, else there are some other kind of kits for options in our store, click here.

  Have a try and you will get great surprise!

  Then, are you going to get this kit?

   Important Steps to Process your order with this kit:

   Step 1: Please check the model number of your LCD first.(Usually, the model no. can be found on a sticker on the back of the LCD panel. If needed, disassemble the plastic shell and you will find the sticker). If you are not sure about the model number, please feel free to contact us for help.

   Step 2: Please check whether your LCD model number is in our list (The list is at the end of the description), if your LCD model number is in our list, please bid on the item and pay for it, and please remember to leave us your LCD model number.

   If you are not sure whether this kit is suitable for your LCD or not, please provide us your LCD panel model no. by sending us the ebay message before bidding this item, so that we can advise a right kit for your LCD . We will give you the reply as soon as possible, and then you can place the order, and pay for it.  

   Step 3: We will send the package via HongKong Post as soon as possible after cleared payment. (If you prefer express shipping, please contact us to pay additional shipping cost before payment.) Waiting for the package.

    We will write corresponding program into the lcd controller board to match your LCD, so this kit will match against one very specific LCD Panel or others that have exactly the same specification.  However, a programmer could help on different LCDs, that is, change the firmware of the LCD controller board by yourself. Be aware that different LVDS cables and Inverters will be needed to match different LCDs. 

  1. Please make sure that your LCD is ok before bidding this item, else you will be responsible for the incompatibility. 

  2. If you concern much about resolution setting, please reconsider before bidding!

  3. We will try our best to prepare the right kit for you, such as writing the corresponding program into the controller board, selecting the suitable LVDS cable and the suitable inverter. But as we don't have an LCD exactly as yours at hand, we can just test the controller with our own LCD. For yours, you need to test it yourself to check if it works well or not. As you know, there are so many LCDs with many varieties in the market, sometimes we can't promise the exact compatibility. Please consider it before bidding! However, we have gained many success in preparing the kit for our customers in real store. So why not have a try to get surprise!

  4. If you are not specialized in electronics or have doubts in operation, please contact us for instruction, as we are not able to responsible for wrong operation.

  5. After finishing the connecting, please don't rush to power on! First, use multi-meter to test whether the GND of the LCD is connected with the GND of the controller board. If not, please check the connection again. If yes, please test whether there is a short circuit between the red wires and black wires of the LVDS cable. If there is a short circuit, it means opposite connection or other errors. Any problem, please feel free to contact us. DIY needs a certain professional knowledge, please kindly take the responsibility of the risk. No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.

  Successful Example (radicalboy_fr -- a French friend's Project ):

Instruction to connect the controller board to the LCD:

1. Take away the old inverter and old LVDS cable from the LCD panel.

2. Connect the new inverter and LVDS cable to your LCD panel.

3. Connect controller board with PC by VGA cable.

4. Input power of 12V,4A.

 Package Include:

    Welcome to customize your own kit!