Battery repair instrument pulse vulcanization 12V16V24V36V48V60V72 power battery capacity detector | Обустройство дома

Battery repair instrument: Specification 12V-72V, suitable for battery capacity 0-32AH. The charger requires that the charger must have an output voltage greater than the battery specification when the battery is not connected. Why, because the repair device uses a voltage from the charger to repair the pulse voltage, he segregates the battery from the charger so that the repair pulse will not be weakened by the charger's capacitance to the ground and the repair effect is necessary. The repair instrument is better than the charger that does not connect the battery without output voltage. The repair device repolarizing the battery by depolarizing the negative pulse discharge first and reusing the high frequency pulse to repair the battery, because the discharge pulse current is very small, and the charging current is far greater than the discharge current, which is like a large reservoir on the side of the flow of water. There is only a small amount of water flowing out at the side. We can't see the height of the water level of the reservoir by the naked eye. So the negative pulse discharge of the detection and repair instrument needs to be put into the disch

 

  arge loop through the instrument.  

本品为自主研发，根据多年来对电池的特性研究，目前各项性能可满足使用电池过程中的检测和修复，功能越全面，对电池增加寿命效果越长，纯手工,，对外观有要求慎拍 ，因为专业所以更有效，毛工 原创。

It has many kinds of repair, such as pulse repair, frequency conversion repair, overcharge repair and so on. The repair effect is better. It provides the battery performance indexes such as voltage, current, time, capacity and so on. It can set off time power and prevent overcharge. This machine can be used in every day when the machine can be repaired.

The use of the repair device: when the connector is connected to the original charger first, this time the charger and the restorer match, the screen will start the screen display, the other end of the battery, and then set up the time of charging repair, the device automatically starts to repair. When dismantling, disconnect the battery and remove the charger. The requirements for the charger are illustrated as follows: Attention: Please strictly implement the charger, before the user, before buying, not to see the explanation, after the purchase and he said to understand, but then again and again to change different angles to ask this question, I really haggard! So before buying, please understand clearly. Oh, the original battery charger can satisfy the battery charger after the battery is switched on, and the battery output voltage is higher than the battery specifications.