Полный Медь G1 "DN25mm 4-45L/мин импульса поток воды Сенсор зал Индуктивный

Полный Медь G1 "DN25mm 4-45L/мин импульса поток воды Сенсор зал Индуктивный

Full Copper G1" DN25mm  4-45L/min Pulse Water Flow Sensor Hall Inductive Switch

1: Specification

Examination requirement

 Appearance

Clean and beautiful, smooth without burr, without off color

Water pressure resistance performance

1.75 MPa pressure has no slack phenomenon, and parts no crack, relaxation, inflation, and deformation anomaly

Working medium

Water, natural water standard, use for a long time the temperature is not more than 60 °C

Flow range

4-45L/Min, Start flow range is: 3L/min

Operating voltage range

DC4.5-18V

Max operating current

10mA

The output pulse high level

In 5 V rated voltage, the output of the high level requirements in 4.5 V above

The output pulse low level

In 5 V rated voltage, the output of the low level requirements below

0.5 V

The output pulse duty ratio

In the rated voltage, the output pulse occupies emptiescompared to 50%±10%

Flow pulse characteristics

F=[5Q-3]±10%, F for instantaneous pulse value (HZ), Q for transient flow (L/min)

Insulating property

Dielectric resistance>100MΩ

Electrical strength

AC500V 50Hz(Don't breakdown or flash winding)

Electrical strength(80°C)

In +80 °C temperature placed in 72 hours, in the environmental temperature back after 1 hour the accuracy of measurement requirements within the plus or minus 5%

Cold resistance(-20°C)

In- 20 °C temperature placed in 72 hours, in the environmental temperature back after 1 hour the accuracy of measurement requirements within the plus or minus 5%

Mode of connection

Red: the positive, black: negative, yellow: pulse signal

2:Frequency Flow Curve Chart

Accumulated Flow Range Pulse Conversion  Proportion: 1L water=225pulse ±10%

3:Installation Instructions

1) its characteristics may change when a magnetic material or to produce magnetic material near the sensor.

2) Enter the sensor in order to avoid particle, sundry, the sensor must be installed filters the water entry.

3) The installation of water flow sensor need to avoid strong vibration and shaking environment, so as not to affect measuring accuracy of the sensor.

4)Please do not disassemble without authorization flow sensors in case of damage, water flow sensors to disassemble a are out of place in the warranty scope.

5) Ever and Never used the structured sensor, when used for direct replacement may be not appropriate place, please timely put forward.

4:Connection Mode
RED line for power+
BLACK line for power-
YELLOW line for pulse signal

5:Application

Widely used in water industrial field, thermostatic water heater, boiler, water dispensers, coffee machines, hot card machines, steam equipment, water system, the campus card sales, selling self-help water systems, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical equipment,  water purifier and smart card equipment. 

5: Real Photo: