Fast arrival FLUKE F1555 insulation resistance tester 10KV 2T ohms | Инструменты

Introduction Up to 10kV digital insulation testing new 1555 and redesigned Fluke 1550C insulation resistance tester can be up to 10kV digital insulation testing , which makes them ideal for a wide range of high-voltage equipment , such as switchgear, motors, generators and cables . Now Fluke insulation testers can be fully specified in IEEE 43-2000 voltage testing, safety rating of CAT IV 600 V, is the best instrument similar products, and provide three years warranty. 1555 and 1550C with the measured value memory and PC interface, potential equipment failure occurred before its discovery , is the ideal tool for preventive or predictive maintenance . Electrical Technical Parameters Tester accuracy is specified accuracy inherent year 0 C to 35 C operating temperature after calibration. Operating temperature outside this range (-20 C to 0 C and 35 C to 50 C), the need to increase the numerical accuracy of 0.25% / C, but in the 20% error range , an additional 1 % / C.

Insulation resistance measurement

Test voltage ( DC )

Range ( DC )

Accuracy ( reading )

250 V <200 k
200 k to 5 G
5 G to 50 G
> 50 G Not specified
5%
20%
Not specified 500 V 200 k
200 k to 10 G
10 G to 100 G
> 100 G Not specified
5%
20%
Not specified 1000 V <200 k
200 k to 20 G
20 G to 200 G
> 200 G Not specified
5%
20%
Not specified 2500 V <200 k
200 k to 50 G
50 G to 500 G
> 500 G Not specified
5%
20%
Not specified 5000 V <200 k
200 k to 100 G
100 G to 1 T
> 1 T Not specified
5%
20%
Not specified 10000 V
( Only 1555 ) <200 k
200 k to 200 G
10 G to 2 T
> 2 T Not specified
5%
20%
Not specified Range bar graph 01 T Insulation test voltage accuracy -0 % , +10% , At 1 mA load current AC current induced suppression 2 mA max

Capacitive load charging rate

5s / F

Capacitive load discharge rate

1.5s / F

Leakage current measurement

Range : 1 nA to 2 mA

Accuracy : (5% + 2 nA)

Capacitance measurement

Range : 0.01 uF to 15.00 F

Accuracy : (15% of reading + 0.03 F)

Timer

Range: 0 - 99 minutes

Resolution Accuracy :
Setting : 1 minute
Tips : 1 s

Live circuit warning

Warning Range:
30 V to 660 V ac / dc,
50/60 Hz

Voltage accuracy :
(15% + 2 V)

General technical parameters Display 75 mm x 105 mm Power supply 12 V lead-acid rechargeable batteries , Yuasa NP2.8-12 Charger Input (AC) Charger Input (AC) 85 V to 250 V ac 50/60 HZ 20 VA The Class II ( double insulated ) instrument provides a Class 1 ( grounded ) power cord. Protective ground terminal ( grounding pin ) is not connected internally . Additional plug retaining pin is only used to increase the capacity . Size 170 mm x 242 mm x 330 mm (6.7 in x 9.5 in x 13 in) Weight 3.6 kg (7.94 lb) Operating Temperature -20 OC to 50 oC (-4 oF to 122 oF) Storage Temperature -20 OC to 65 oC (-4 oF to 149 oF) Humidity 31 oC below 80 %, 50 % linear down to 50 oC when Altitude 2000 m Shell tightness IP40 Input Overload 1000 V ac Electromagnetic Compatibility EN 61326 Certification   Safety CAT III 1000 V, CAT IV 600 V Pollution Degree 2 Model Name Description Buy ** FLUKE-1555 / kit 10 KV Insulation Tester Kit     FLUKE-1555 10 KV Insulation Tester     FLUKE-1550C / Kit 5 KV Insulation Tester Kit     FLUKE-1550C 5 KV Insulation Tester