Leadshine легко сервопривод HBS2206 прямая 220/230 В переменного тока Вход 6A ток плюс Servo

Notice:           

We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier.

 

HBS2206 Easy Servo Drive ( ES-DH2306)

+

1103HBM120H-1000 Easy Servo Motor (ES-MH34120)

 

Notice:  HBS2206 (Chinese market version) =  ES-DH2306 (Outsea market version) 1103HBM120H( Chinese market version )=ES-MH342120  (Outsea market version)     This is set sales, 1 piece include: 1: HBS2206 Easy Servo Drive: 1 piece 2: 1103HBM80H-1000 Easy Servo Motor : 1 piece 3: Encoder cable CABLEG-BM5M0: 1 piece (5 meters)     1: HBS2206:   By applying servo control on easy servo motors (stepper motors with encoders), Leadshine HBS2206 easy servo drive combines features of both open loop stepper drives and brushless AC servo drives. It takes step and direction control commands, direct 220/230 VAC input voltage, and outputs load-based current up to 6.0A. It is capable of powering 3-phase easy servo motors of NEMA 34/42, closing the position loop, and eliminating position tracking errors in real time.   Similar to brushless AC servo drives, an HBS2206 easy servo drive can take encoder feedback from driven high voltage easy servo motors and close the position loop to eliminate possibility of lose of movement synchronization. Therefore, the position loop between the motor and drive is fully closed and "lose of step" in open loop stepper systems is totally eliminated. The HBS2206 easy servo drive adopts advanced control algorithm and just outputs "just enough" to the driven motor to to meet the torque requirement. So, easy servo systems driven by HBS2206 can response and accelerate much faster than open loop stepper systems in high precision and with extra low heating, extra smooth, much higher torque and speeds.   Compared with conventional brushless servo systems, easy servo / closed loop systems powered by HBS2206 servo drive can output much higher low to medium speed torque (1-2000 RPM). There is no overshooting, no hunting, and zero settling time. Also, no tuning and plug-and-play for almost all applications makes HBS2206 powered easy servo/closed loop systems give advantages over conventional brushless servo systems.   The HBS2206 easy servo drive takes direct HBS2206 voltage input without the need of a VDC power supply. Each drive has a built-in LED panel to allow easy custom configuration, fine tuning, and motion real time status monitoring. In addition, HBS2206 can be easily configured as an open loop stepper drive to power three phase stepper motors.     Features: Stepper based servo control for stepper motors with encoders Step & direct, or CW/CCW control Closed position loop for no loss of steps 150 - 230 VAC input voltage Load based output current of 0.50 - 6.00 A default 200KHz input frequency; 500Khz optional Quick response and acceleration No torque reservation Extra low drive motor heating & noise No hunting, no overshooting, almost zero settling time No tuning & "plug-and-play" for almost all applications No power supply for direct AC input     Specifications Model:  HBS2206 Phase:   3 Control Mode:   Step & Direction Max Input Frequency:  200KHz Encoder Feedback:   Yes. Fully close the loop between the drive and drive motor Input Voltage Range:   150 - 240 VAC Peak Current:  6.00 A Software Cofig Resolution Range:   200 - 102,400 (increased by 200) Default Step Resolution:   4000 Default Holding Current Percentage:   20 % Communication Type:  RS232 Pulse enabled at:   Rising edge Isolation Resistance:   500M Ohm Environment:   Avoid dust, oil fog and corrosive gases Ambient Temporature:   0-50°C Humidity:   40–95% RH Operating Temporature:   0-70°C Vibration:   5.9 m/s2 Max Storage Temperature:   -20-65°C Specification:   6.69 X 5.51 X 2.76 Inches Weight:   3.96 lbs   Electrical Specifications (Tj = 25oC/77oF)       Connector and Interface               Typical Connection                           Mechanical Specification       Real Photo                               Matching Easy Servo Motor 863HBM70H-1000 863HBM80H-1000 863HBM70H-BZ-1000 1103HBM120H-1000 1103HBM200H-1000       2: 1103HBM120H-1000    The Leadshine 1103HBM120H-1000 easy servo motor is a 1,700 oz-in (12 N.m) 3-phase NEMA 42 stepper motor with 1,000-line incremental encoder (A ,  B channels). It is specially designed to be for powered by 220/230 VAC input high voltage easy servo drives (closed loop stepper drives).   When driven by Leadshine high voltage easy servo drives (closed loop stepper drives), the position loop between 1103HBM120H-1000 and the drive is closed. You will never get stall or loss of steps, often seen in open loop stepper systems. Because there is no torque resolution needed like in open loop stepper systems, you can much better high-speed performance than open loop stepper systems by increasing up to 30%.   With the advanced features of no loss of steps, huge torque, no power supply, no overshooting, and plug-and-play setup, the combination of of 1103HBM120H-1000 and companion easy servo drive is ideal solution for upgrading open loop stepper systems, or replace expensive / hard to configure traditional brushless servo systems. It has been widely used in many industrial applications such as CNC router, CNC mills, plasma, textile equipment.       Features: Designed for driving by 220/230 easy servo drives or stepper drives 3-Phase NEMA 42 frame size 1,700 oz-in (12.0 Nm) holding torque Speed range: 0-3,000 RPM Integrated 1,000-line incremental encoder with A, B channels Strong 0.748 inch (19 mm) shaft High precision Quiet movement and low motor heating & noise     Specifications   Model: 1103HBM120H-1000 =  ES-MH342120 Frame Size:     NEMA 42 Phase:   3 Step Angle:   1.2° Holding Torque:   12 Nm (1700 Oz-in) Number of Leads:   3 Encoder Resolution:   1,000 Line Shaft Size:   0.748 inch  (19.000 mm) Targeted Input Voltage:   220/230 VAC Phase Current:   4.2 A Inductance:   13 mH Resistance:   1.2 Ohm Rotor Inertia:   0.1551 oz-in-sec2 Length:   6.34 inch  (162 mm) Weight:   18.94 lbs  (8.6 kg)   Mechanical Specifications (unit: mm)       Real photo                        

Notice:

1: The default delivery mehod is based on free shipping by Registered Post Service.

2: Becuase there is the dlivery cost of fluctuation of the DHL,UPS, Fedex or TNT, if you are in need of these faster service, please contact our online consultant, and will offer you lowest cost for these express

3: If you are in need of other products with different model, please contact our online sales, will offer you best price and lowest delivery cost--based on GENUINE  products.